Installation Instructions; Leveling Instructions - Danby Silhouette DWC140D1BSSPR Manuel Du Propriétaire

INSTALLATION INSTRUCTIONS

FEATURES
1. Tempered Glass Door: Tempered glass door
minimizes the transfer of heat between the inside
and outside of the unit.
2. Interior Light: Illuminates both compartments of
the wine cooler.
3. Shelves: Sturdy stainless steel tracks extend fully
outside the cabinet.
4. Electronic Display and Controls: For viewing
and regulating the temperature of the wine
cooler.
5. Magnetic Door Gaskets: Tight fi tting seals lock
in the cold air and maintain the humidity levels.
6. Handle
7. Front Mounted Exhaust: Allows for integrated
(built-in) applications.
8. Leveling Legs: Adjust to level the appliance.
FRONT VENT
This appliance is front breathing. Do not block the
front air vent as this will result in high operating
temperatures, higher energy usage and possible
system overheating and failure.

LEVELING INSTRUCTIONS

There is an adjustable leg on the bottom of the
appliance that can be turned up or down to ensure
that the appliance is level. It is important that the
appliance is level to minimize noise and vibration.
To level the appliance:
1. Move the appliance to its fi nal location.
2. Turn the leveling leg counter-clockwise as far as
it will go, until the top of the foot is touching the
bottom of the chassis.
3. Slowly turn the leveling leg clockwise until the
appliance is level.
1
5
4
2
3
4
6
7
8