Installation Instructions; Leveling Instructions - Danby Designer DWC310BLSDD Guide D'utilisation Et Soins De Propriètaire

INSTALLATION INSTRUCTIONS

LEVELING INSTRUCTIONS

WARNING
Extreme Weight Hazard! Use 2 or more people
when moving the wine cooler.
It is important that your wine cooler is level. To level
the wine cooler:
1) Move the wine cooler to its final location.
2) Have someone gently lean on the front of the
wine cooler to take some of the weight off of the
leveling leg.
3) Turn the leveling leg clockwise to raise, and counter-
clockwise to lower the wine cooler. Continue in this
manner until the wine cooler is level.
LOCATION
DO...
• Select a location with a strong, level floor.
• Allow for 5 inches of space between the back of the
appliance and any adjacent wall.
• Avoid direct sunlight and heat. Direct sunlight may
affect the acrylic coating; heat sources nearby will
cause higher electricity consumption.
DO NOT...
• Use this appliance outdoors: This appliance is
intended for household use only. Do not attempt to
operate or store this appliance outdoors.
• Build this appliance into an enclosure: This appliance
is designed for a Free-Standing application only
and is not intended to be "Built-In".
4
5 In. 5 In.