ASSEMBLY INSTRUCTIONS
STEP 5: INSTALLING THE BRACKET ASSEMBLY
Place the Bracket Assembly (A) on top of the Lower Console Tray (E) and thread the wires from
the console through the hole in the Bracket Assembly (A) see Fig. 1. From underneath the
Lower Console Tray (E) secure the Bracket Assembly (A) with 4 Screws (C), 2 Spring Washers
(F) and 2 Screws (G).
Note: make sure the wires are not pinched when installing the screws.
Figure 1
Register your product warranty online at: www.BHFitnessUSA.com
18
Questions regarding warranty and parts call: 636.634.2217