Valor PORTRAIT President 536CXB Guide D'installation page 4

Framing
The President ZC Front comes supplied
with a framing plate for zero clearance
applications. The framing plate is
painted black and may be left exposed
beyond the perimeter of the cast iron
front or may be covered with non-
combustible material if desired.
•• A non-combustible hearth is not
necessary in front of this appliance.
•• The appliance is approved to install
directly on wood sub- ooring.
•• Any framing construction must be
clear of stand-offs.
•• Be aware that the area of 7½”" x 26¼”"
(19 cm x 67 cm) immediately above
the framing plate must be constructed
with non-combustible materials as
shown in  gures.
4
Raised plinth
not shown
Framing plate exposed
Raised plinth
not shown
Framing plate covered
Tab Detail
Framing Plate Protudes
by desired wall finish
thickness
non-combustible finish
& backing required
Mount Brackets to Heater
Install Framing Plate
flush with framing or
butt drywall to plate
and run finish over plate
Bend Tabs out
for desired wall
finish thickness