Valor Horizon Guide D'installation

INSTALLATION MANUAL
Clearview Front Vintage Iron 645CFV
Approved for use with Valor heater models 534J ONLY
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and must be
installed for the protection of children and other at-risk
individuals.
The 645CFV Horizon Clearview Vintage Iron Front is designed to be used on
the 534J Valor heaters.
Mantel clearances are unchanged from those shown in the 534J installation
manual.
37-1/4" (946 mm)
*NOTE: Bottom of plate is flush with
bottom of heater. Install bottom of
heater flush with finished hearth.
4002225-10
© Copyright 2020 Miles Industries Ltd.
Horizon
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
1-1/2"
(38 mm)
Appliance
outline
2-1/2"
(64 mm)
INSTALLER: Leave this
manual with the appliance.
CONSUMER: Retain this
manual for future reference.
Note: This kit must be
installed or serviced by a
qualified installer, service
agency or gas supplier.
These instructions are to be
used in conjunction with the
main installation instructions
for the above listed heater
model.
Note: Wall finish must be flush or slightly
in front of this frame on heater!
Heat Exchanger Cover
Heat Baffle
Window
Barrier
Bolts
Screen
Cover
Overview (Heater and fret sold separately)
534
Clearview Front
Fret
1