Cleaning Recommendations; Accessories; Environmental Notice - Oral-B iO Mode D'emploi

through the entire Bluetooth pairing
procedure. You may also find it under the
App´s settings (More -> Your brush).
Note: Oral-B App functionality is limited if
Bluetooth is deactivated on your smartphone (for
directions please refer to your smartphone's user
manual).
• Pairing is indicated via the Smart Pressure
Sensor light. Any App instructions will be
displayed on your smartphone.
• You may change Bluetooth settings at any
time on your handle via the display -> Settings
-> Bluetooth enable/disable.
• Keep your smartphone in close proximity
(within 16ft/5m distance) when using it with
the handle. Make sure the smartphone is safely
positioned in a dry place.
Note: Your smartphone must support Bluetooth
4.2 (or higher)/Bluetooth Smart in order to pair
your handle. Check www.oralbappavailability.co.
uk for compatible smartphones and country
availability of the Oral-B App.
Caution: Follow your smartphone's user manual
to ensure your phone/charger is designed for use
in a bathroom environment.

Cleaning recommendations

After brushing, rinse your brush head under
running water with the handle switched on.
Remove the brush head and clean the handle and
brush head separately. Make sure water runs
inside the top of the handle as well as inside the
brush head. Wipe all parts dry and let them
air-dry before reassembling your toothbrush
again.
Unplug the charger before cleaning. Clean the
charger regularly with a damp cloth.
Please check individual cleaning instructions for
each accessory in its "Accessories" paragraph.

Accessories

(depending on model)
Charging Travel Case (h)
• To charge your handle (5) place it in the
charging travel case (h) and connect it to an
electric outlet, using the extra power supply
(h2) provided. The power supply may be used
for all global mains voltage ranges (100 –
240V).
• The flashing light (h1) of the charging travel
case indicates that the handle is charging.
Once the handle is fully charged the light turns
off. A full charge typically takes 6 hours.
• The outer and inner case should be cleaned
with a damp cloth only. Make sure that the
handle and brush head are completely dry
before storing in the travel case.
Note: Clean stains on travel case surface
immediately. Store travel case in a clean and dry
place.
Travel Case (g)
Store the clean and dry toothbrush/brush heads
in the travel case (g). The outer and inner case
should be cleaned with a damp cloth only.
Note: Clean stains on travel case surface
immediately. Store travel case in a clean and dry
place.
Brush head holder stand (f) / Brush head holder
with cap (e)
You may store your cleaned brush heads on the
pins of the brush head holders. Make sure brush
heads are dried before placing them in the holder
and/or closing the cap. Brush head holders and
cap are dishwasher-safe.
Zipper Pouch / Magnetic Pouch
Store the clean and dry toothbrush/brush heads
in the zipper pouch. The outer and inner case can
be cleaned under running water. Store the clean
and dry toothbrush along with the brush head
holder (e) in the magnetic pouch. Make sure
brush heads are dried before placing them into
the holder and/or closing the cap. The outer and
inner surfaces can be cleaned under running
water. Store pouches in a clean and dry place.
Note: Clean stains on pouch surfaces immediately.
Subject to change without notice.

Environmental Notice

Product contains batteries and/or
recyclable electric waste. For
environment protection do not dispose in
household waste, but for recycling take to electric
waste collection points provided in your country.
9