Setting The Daily On Timer; Specifications - Hitachi AXM549BT Notice D'utilisation

Setting the Daily on Timer

You can use the setting timer to make the unit automatically turn on at a certain time everyday
from standby. When the setting timer is on, the timer indicator " " will be displayed. But the
clock must be correctly set for the timer to operate correctly.
1. In standby mode, press and hold the timer button (
SET] scrolls on the display.
- Then the source is displayed, e.g. DISC.
2. Press the , or
FM DISC
3. Press the button, the hour indicator will blink.
TIMER
4. Set the hour with the
5. Press the TIMER button, the minute indicator will blink.
6. Set the minute with the
7. Press the TIMER button, the volume indicator will blink.
8. Adjust volume with the
9. Press the TIMER button, the timer is set and activated, and " " is displayed.
To deactivate or re-activate an alarm timer
In standby mode, press the
- If timer is activated, " " is displayed.
- If timer is deactivated, " " is disappeared.
Caution:
* If disc/USB source is selected and the audio cannot be played, TUNER is activated
automatically.

Specifications

Power adaptor Input
Power adaptor Output
FM Tuning Range
Power Consumption
Output Power
THD
Speaker Impedance
Speaker Input Power
Dimensions
Compatible CD discs
Audio Compact Disc
CD-R
CD-RW
, or button or
USB
VOL+/-
button.
VOL+/-
button.
VOL+/-
button.
VOL+/-
button to activate or deactivate timer.
TIMER
: AC 100-240V 50-60Hz 1.2A
: DC 15V 3A
: 87.5~108 MHz
: 35W
: 25W x 2
≤
: 1%
: 4Ω
: 25W
: (Unit) 222(W) x 90(H) x 255(D) mm
(Speaker) 115(W) x 152(H) x 212(D) mm
GB-23
) on the remote control, until [TIMER
TIMER
button to select a source.