Connecting The Ac Power Cable; Eco-Power/Standby Features; Switching On / Off; Switching The System To Eco Power/Standby Mode - Hitachi AXM549BT Notice D'utilisation

Connecting the AC Power Cable

ECO-Power/Standby Features

Switching ON / OFF

When you first connect the unit to the DC Jack, the unit will be in standby mode.
• Press the standby
• Press the standby
will scroll across the display.

Switching the system to ECO Power/Standby mode

Press and hold the standby
or normal standby.
* ECO Power standby mode
The clock will not be displayed. Press the
* Normal standby mode
The clock display on the LCD.

Setting the Clock

Setting the Clock Manually

Caution: You can set the clock in standby mode only.
1. In standby mode, press and hold the clock button (
SET and CLOCK 24 begins to blink.
2. Set the 12/24 hour format with the
3. Press the clock button (
4. Set the hour with the
5. Press the clock button (
6. Set the minute with the
7. Press the clock button (
Note:
• To exit clock setting mode without storing, press the stop button (
• If no button is pressed in 90 seconds, the unit exits clock setting mode automatically.
Insert the AC Power cable into a wall outlet, then your
unit is ready to use.
Caution:
* Be sure to unplug the power plug from the outlet
when going out or when the unit is not in use for
an extended period of time.
button to switch the unit on. The word "HELLO" will show in the display.
button to switch the unit back to standby mode. The words "BYE BYE"
button for 2 seconds or more to switch to ECO Power Standby
CLOCK
or
VOL- VOL+
), hour indicator will blink.
CLOCK
or button.
VOL- VOL+
), minute indicator will blink.
CLOCK
or button.
VOL- VOL+
), the built-in clock starts operating.
CLOCK
GB-15
button to display the clock on the LCD.
), the VFD will display CLOCK
CLOCK
button.
).
L