Use The Usb - Hitachi AXM549BT Notice D'utilisation

 Repeat A-B can be set by pressing the repeat A-B button (
- First press : Select the start point, the words "
- Second press : Select the end point, the words "
- Third press : To cancel repeat play, the word "
Note: The section A and B can be set only within the same track.

Use the USB

Caution:
Do not use a high-capacity USB hard disks. Only USB flash memory can be used.
By connecting an USB mass storage device (including USB flash memory, USB flash players
or memory cards) to this unit, you can enjoy the device's stored music through the unit.
For devices with USB Cables:
1. Insert one plug of the USB cable (not supplied) to the
2. Insert the other plug of the USB cable to the USB output terminal of the USB device.
For memory Cards:
1. Insert the memory card into a card reader (not supplied).
2. Use a USB cable (not supplied) to connect the card reader into the
A-B).
" will stay lit.
A-
" will stay lit.
A-B
" will disappear.
A-B
1. Insert the USB device's USB plug into the
on the unit.
2. Repeatedly press the function select button (
on the unit or directly press the USB function button
( ) on the remote control to select the USB source.
- The word "USB" will be displayed on the front panel.
3. The device's stored music will be played automatically.
4. When you store more than one folder in the USB
flash, use the button on the remote control to
ALB+/-
select the next/previous folder. Then choose the track
with the / button to play the folder.
H G
5. The player support the USB music file format of MP3,
WMA only.
socket on the unit.
GB-21
socket
)
FUNCTION
socket on the unit.