Play From Bluetooth Device; Setting The Sleep Timer - Hitachi AXM549BT Notice D'utilisation

Play from Bluetooth device

The unit has a Bluetooth function that can receive a signal within 10 metres.
Pairing the unit with a Bluetooth device to listen to music:
1. Repeatedly press the function select button (
bluetooth function button (
- The word "BLUETOOTH" will be displayed on the front panel.
2. Activate your Bluetooth device and select the search mode.
3. " " will appear on your Bluetooth device.
AXM549BT
4. Select " " and enter "
AXM549BT
5. To disconnect the Bluetooth function, press and hold the pairing cleared button (
on the remote control or disable the function from your Bluetooth device.
Note:
• If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter
pairing mode automatically.
• This unit supports A2DP (Advanced Audio Distribution Profile).

Setting the Sleep Timer

Use the sleep timer to turn the unit off after a certain number of minutes when in play mode. By
setting the sleep timer, you can fall asleep to music and know that your unit will turn off by itself
rather than play all night.
 When the unit is turned on, press sleep button (
time (in minutes):
- [SLEEP 120]
- [SLEEP 90]
- [SLEEP 60]
- [SLEEP 45]
- [SLEEP 30]
- [SLEEP 15]
When sleep timer is activated, the "
To deactivate sleep timer
Press the SLEEP button repeatedly until [SLEEP OFF] is displayed.
When sleep timer is deactivated, the "
) on the unit or directly press the
FUNCTION
) on the remote control to select the bluetooth source.
" for the password if necessary.
0000
SLEEP
" is displayed.
" is disappears.
GB-22
) repeatedly to select a set period of
)
PAIRING