Safety Instructions - AFG KERMI WKS Instructions D'utilisation Et De Montage

Control and indicator elements
2
1
3
Functions / operation
Comfort mode - temperature regulation
In the comfort mode, the thermostat retains
the temperature level by switching the heating
element on and off constantly.
Set the desired room temperature or the
temperature level of the radiator on the
The "❄
antifreeze setup.
Boost mode
In the boost mode, regardless of the set tem-
perature level, the heating element heats con-
switches back to the comfort mode.
To activate the boost mode or early cancel-
For safety reasons, the thermostat switches off
mode).
Display
4
LED display
mode (4)
5
Lights red
6
Lights yellow Setpoint temperature has
Blinks red
EN – Installation instructions
The device may only be connected by an elec-
trical specialist. An electrical specialist is so-
meone whose technical training, knowledge,
regulations allows him to assess the tasks assi-
gned to him and recognise potential hazards.

Safety instructions

installation and commissioning.
After installation pass the instructions on
to the end used.
WARNING
Danger of death from electric shocks!
Install and connect the device only in the
de-energized state.
Operating conditions
Install thermostat only in conjunction
with electrical heating elements from the
manufacturer's product range.
When installing in rooms with bath or sho-
wer facilities: take into account protective
areas according to national installation
Also follow all local regulations.
When installing , provide an on-site residu-
Meaning
Heating phase
been reached, heating ele-
ment is switched off
Boost mode is active
-