AFG KERMI WKS Instructions D'utilisation Et De Montage page 9

Designation of the wires:
–
–
–
low)
–
sary.
Setup of the operating mode
In the as-delivered condition, the thermostat
is programmed for regulating the room tem-
perature. If a regulation independent of the
room temperature of the radiator tempera-
–
blinking yellow.
Display of the operating mode goes out.
–
Towel warming mode is active.
If regulation of room temperature is desired
instead of towel warming, repeat the above
mentioned steps. For this, set the rotary switch
plays the conversion by blinking red.
Display of the set mode
–
perature regulation mode
–
–
Display of the operating mode goes out.
–
The thermostat is ready to operate.
-
-
-
-
-
-
-
-
-
-