Table des Matières
Publicité
7.9. Make periodic breaks at work.
7.10. Keep and refer to the accessories carefully.
7.11 Do not throw the tool, do not overload, do not soak in water and other liquids do not use it for
mixing adhesives and concrete coatings.
8. Operation and maintenance.
Clean the body with dry cloth. Do not use any cleaning agents, as they may damage the casing.
8.1 Replacing carbon brushes.
Exports (shorter than 5 mm), up or broken engine carbon brushes should be replaced. Always
replace both brushes simultaneously. Work on replacement of carbon brushes entrusted only to
qualified person with original spare parts in service of business RAIDER.
8.2. All faults should be repaired by RAIDER service workshop.
The repair of your power is best carried out only by qualified specialists, which used only original
spare parts. This ensures their safety operation.
9. Environmental protection.
9.1.In order to protect the environment, the power tool and packaging must be suitably processed for
the re-use of the raw materials contained therein. Do not dispose of power tools in household waste!
According to the European Union Directive 2012/19 / EC on end-of-life electrical and electronic
devices and the validation and as a national law, power tools that can no longer be used must be
separately collected and subjected to appropriate processing for the recovery of the contents raw
materials.
9.2. Rechargeable battery.
Lithium-ion battery (Li-ion).
Do not dispose of batteries in household waste or in water tanks! Do not burn them!
Batteries should be collected, recycled or disposed of in an environmentally friendly way. According
to Directive 2006/66 / EC, faulty or waste batteries or batteries must be recycled.
21
Publicité
Table des Matières
