Table des Matières
Publicité
parameter
Voltage
Frequency
Protection class
3
Store the battery only in
dry rooms with an ambient
temperature of +10°C to +30°C.
Place only charged
batteries in storage (charged at
least 40%).
1. General guidelines for safe operation.
Read all instructions carefully. Failure of the nature following instructions can cause electric shock,
fire and / or severe injuries. Keep these instructions in a safe place.
1.1. Safety in the workplace.
1.1.1. Keep your workplace clean and well lit. Disarray and poor lighting may contribute to the
occurrence of an accident.
1.1.2. Do not operate in an environment where the cordless drill with an increased risk of an
explosion in the vicinity of flammable liquids, gases or powders.
During operation of the cordless drill can be separated sparks that can ignite powders or fumes.
1.1.3. Keep children and bystanders at a safe distance while working with the cordless drill.
If your attention is diverted, you may lose control over the cordless drill.
1.2. Safety when working with electricity.
1.2.1. Protect your cordless drill from rain and moisture.
1.2.2.Penetration of water into the cordless drill increases the risk of electric shock.
1.3. Safe way of working.
1.3.1. Be concentrated, watch their actions carefully and act cautiously and prudently. Do not use
the cordless drill, when you are tired or under the influence of drugs, alcohol or narcotic drugs.
A moment of distraction at work striking drill may have the effect of extremely serious injuries.
1.3.2. Work with protective work clothing and always with safety glasses.
Wearing Suitable for drilling shock and the activities of personal protective equipment, such as
respiratory masks, healthy, tightly closed shoes grapple with a stable, protective helmet and silencers
(hearing protectors), reduces the risk of accident.
1.3.3. Avoid the danger of switch on the cordless drill inadvertently. If, when you carry the cordless
Charger
measure
V AC
Hz
-
value
230
50
II
15
Publicité
Table des Matières
