Dacor DOP36P86DLS Manuel D'installation page 25

Masquer les pouces Voir aussi pour DOP36P86DLS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

WARNING
Do not exceed 25 ft-lbs of torque when making gas line connections.
Overtightening may crack the pressure regulator resulting in gas leak.
Flexible connector hookup
Installer: Inform the consumer of the location of the gas shut-off valve.
Gas Shut-Off Valve
0.5 in or 0.75 in Gas Pipe
Adapter
Flex Connector
(6-ft max.)
Adapter
NOTE
If your area requires a rigid pipe hookup, contact a qualified installer, service
agency, or gas supplier.
The gas shut-off valve should be installed in an accessible location in the gas
piping, external to the appliance, for the purpose of turning on or shutting off
the gas to the appliance.
Install_DOP36P86DLS_DG68-01106E-00_EN+MES+CFR.indb 25
Tubing Line to Cooktop
Control Manifold
Pressure
Regulator
Step 8. Convert to lp gas (optional)
All new gas ranges are shipped from the factory set up to use natural gas.
This Dacor gas range can be converted to use LP gas.
(Contact a qualified service technician.)
The conversion process should only be performed by a qualified LP gas installer.
Conversion instructions and LP orifices will be supplied with the LP conversion kit.
The conversion to LP requires all burner orifices to be changed (6 surface burners
and 2 oven burners).
In addition, the nozzle on the gas pressure regulator needs to be reversed. All
replaced orifices must be left with the consumer, including the instructions and
retrofit sizes and orifice indication.
BURNER ORIFICE SIZES AND OUTPUT RATINGS
(LP Gas [Propane] 10 in WCP)
Burner Location
BTU Rate
LF
16,500
LR
14,500
RF
16,500
RR
14,500
CF
14,500
CR
14,500
BURNER ORIFICE SIZES AND OUTPUT RATINGS
(Natural Gas 5 in WCP)
Burner Location
BTU Rate
LF
22,000
LR
16,000
RF
22,000
RR
16,000
CF
16,000
CR
16,000
Orifice Size [mm]
In 0.46 / Out 0.78*2
In 0.46 / Out 0.74*2
In 0.46 / Out 0.78*2
In 0.46 / Out 0.74*2
1.12
1.12
Orifice Size [mm]
In 0.85 / Out 1.40*2
In 0.70 / Out 1.17*2
In 0.85 / Out 1.40*2
In 0.70 / Out 1.17*2
1.78
1.78
English 25
2020-07-01 오후 3:44:10

Publicité

Table des Matières
loading

Table des Matières