Adjusting The Angle Of The Plate Supports - Samsung DMT800 Série Manuel D'utilisation

using your dishwasher

ADJUSTING THE ANGLE OF THE PLATE SUPPORTS

You can adjust the angle of the tines in the upper rack to three different positions to match the size and
shape of your dishes. To adjust the tines, grasp the handle at the back of the rack and push it left or right.
See the illustration below.
In the lower rack, you can easily remove the plate support to make room for large items such as pots
and pans. To remove the plate support, lift up the handles (A). To refi t the plate support, align it so it is in
place, and then push down on the handles (A). To fold down the fold-down tines on the lower rack, remove
the rack from the dishwasher, turn the rack over, grasp the tine (B), and then push it backward. See the
illustration below.
Upper rack
Lower rack
14_ using your dishwasher
DMT800_DD68-00050A-05_EN_20120921.indd Sec4:14 DMT800_DD68-00050A-05_EN_20120921.indd Sec4:14
A
B
2012-09-21 2012-09-21 2:08:41 2:08:41