Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
General safety instructions
–
Of plastic surfaces (e.g. enclosure, sensor element, special coating,
supplementary labels, ...)
–
Of isolated capacitances (e.g. isolated metallic labels)
● Drained battery packs must be disposed of in an environmentally-appropriate
manner.
● Observe the national waste disposal laws.
Installation
● Avoid electrostatic charging (e.g. do not rub dry):
–
Of enclosure and antenna
–
Of connecting cable
–
Of special version with pushbuttons (if present)
● If electrostatic charging is avoided (e.g. through friction, cleaning, maintenance,
high flow of process medium): WirelessHART adapter can be used in gas groups
IIC and IIB.
● WirelessHART adapter: label with warning "Avoid electrostatic charging".
● Observe the directives for connecting intrinsically-safe circuits.
● To retain the degree of protection of the enclosure:
–
Screw the cover tight.
–
Mount the cable entry appropriately.
● Following alignment of the enclosure (rotating): tighten the locking screw again.
● Protect the connecting cable between the WirelessHART adapter and the field
device against tension and friction (e.g. electrostatic charging resulting from flow
of process medium).
14
Direct installation on the
field device
Remote installation with
cable connection
WirelessHART Adapter SITRANS AW200
A5E02777167-06, 07/2017
Publicité
Table des Matières
