Dibo PTL Serie Mode D'emploi page 53

Chemical cleansing agents: (if necessary)
Read always firstly the regulations on the packing of the product.
Never clean with inflammable products.
See for separate care/cleaning of evacuation water.
See for the necessary personal protective equipment (glove, clothing, optical device...).
Put the chemicals tank directly beside the machine. Remove the filler cap and hang the supply-hose in the tank.
Care always for a ventilated hole in the filling cap!
Use always the most suitable medium to fill the chemical tank, the material of the internal tank exists of PE.
Take care that the tank is always protected sufficiently against the used medium.
Soften:
Special fluid for soften of hard and very hard water. Application of this product reduced considerably fastening on
floating lime - and iron chloride parts on heating spirals, piping, sprinkler heads etc. of heating equipment, high
pressure - and steam cleaners, etc.. A continuous use will extend the life span of the machine considerably and
improve simultaneously the output strongly.
Use the DiBO softener (1.837.001) , contact DiBO for more info. Good softeners are:
* Biologically degradable
* PH between 6-9
* NON inflammable
Traffic:
Protect piping and cables which run over a roadway with dock boards.
Personal security measures:
The machine not move during the use. Avoid a bad posture.
Consult at skin penetration immediately a doctor and communicate certainly the type of used chemical product.
Build in the machine and flue tube in a workspace (If of application):
At building in machines with combustion engine in a workspace, one must ensure sufficient air supply from out-
side, sufficient air and gas evacuation. The burner outlet must have a free outlet.
Let combustion gases not escape in a closed array, use a exhaust system. Use a draft stabilizer at too long chim-
ney/exhaustion, this to avoid possible counter pressure whereby the combustion boiler can be too hot!
For further technical information on building in the machines please take contact with the DiBO dispenser.
Watch out for damage by the invading cold air at freezing temperatures, through the air outlet.
Special instructions for combustion engines:
Do not cover the engine when it is in use. Fill never up if the machine is in use.
Use only the recommended prescribed fuel.
Unsuitable fuels cannot be used there them are able to form a danger.
Do not grab or bent in front of the exhaust opening when the engine is in use.
Do not touch the burner kettle and do not cover the gas outlet. Injury and fire danger.
Fuel is not a fleeting toxic substance, do not inhale fumes unnecessary.
Do not touch the engine block or the exhaust (risk of injuries and burns).
The CO- gas produced during burning is hazardous, provide sufficient ventilation with fresh air. The engine may
only be used inside in exceptional cases and when a necessary exhaust of gas/ventilation is available.
Vibrations (hand/arm):
The hand/arm vibrations have no harmful influence at use of a cleaner with normal nozzle.
The action value of 2.5 m/s² and limit value of 5 m/s² (= risk indication) are hereby not reached at intensive use on
weekly basis! A long use of the cleaner with rotating head can cause physical ills such as: blood flow disturbanc-
es, through vibrations on lance and spray gun (see technical data chapter 8 for the action- and limit values at use
with rotating head). Therefore, care your personal protective measurements such as protective gloves.
With regular, prolonged use of the cleaner and repeated occurrence of symptoms (e.g. tingling of fingers, cold
fingers, pain in joints of hand/arm, nerve disorder), we recommend to take a medical check- up!
Continuous operation during a long period is not recommended at use of the lance with rotating head, so work
with pauses to reduce the exposure time, use alternating the ordinary spray nozzle during a period or change
regularly of user!
Indication of possible inhalation of aerosols:
During use of the cleaner aerosols can arise. These aerosols are harmful to the health. Take the necessary pre-
cautions to prevent possible inhalation of aerosols (eg dust masks to protect, FFP Class 2 or higher). The DiBO
lance is equipped with a protective cap in front that offers minimal protection against the release of aerosols.
DiBO n.v. 53