Items Supplied; Accessories; Technical Data; Circular Saw - Hilti Scw 22-A Mode D'emploi Original

Status
1 LED lights.
1 LED blinks, the power tool is ready for use.
1 LED blinks, the power tool is not ready for use.
4 LEDs blink, the power tool is not ready for use.
Battery charge status cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch.
If the battery display LEDs blink, please observe the instructions given in the Troubleshooting section.
3.4 Fence
Use of the single arm fence allows precise cuts to be made along the edge of the workpiece, or strips of
even width to be cut.
The fence can be fitted on either side of the base plate.
3.5

Items supplied

Circular saw, saw blade, hex key, fence, vacuum cleaner hose connector, operating instructions.
Spare parts, consumables and accessories approved by Hilti for use with the product can be found at
your local Hilti Store or online at: www.hilti.group | USA: www.hilti.com
3.6

Accessories

Clamping flange, mounting flange, clamping screw.
4

Technical data

4.1

Circular saw

Rated voltage
Weight
Specified blade diameter
Blade disc thickness
Kerf width
Saw blade arbor size
Rated speed under no load
Maximum cutting depth
Bevel cutting angle
Operating temperature
Storage temperature range (without battery)
8 English
Meaning
Charge status: 10 % to 25 %
Charge status: < 10 %
The battery has overheated or is completely dis-
charged.
The power tool is overloaded or has overheated.
2153714
*2153714*
SCW 22-A
21.6 V
9.0 lb
(4.1 kg)
6.3 in ... 6.5 in
(160 mm ... 165 mm)
0.02 in ... 0.06 in
(0.5 mm ... 1.5 mm)
0.06 in ... 0.1 in
(1.5 mm ... 2 mm)
0.8 in
(20 mm)
4,000 /min
2.2 in
(57 mm)
0° ... 50°
1 ℉ ... 140 ℉
(−17 ℃ ... 60 ℃)
−4 ℉ ... 158 ℉
(−20 ℃ ... 70 ℃)