Fiskars Fuse Creativity System Guide De Démarrage page 9

Make a Sandwich
Place crafting material on top
of inked letterpress plate.
Add the cutting plate, rubber
side down, on top of the
crafting material.
Tip: Printed names on the
cutting plates will always
face up.
One Pass Through
With one hand, gently push the
sandwich toward the rollers. With
other hand, turn the crank. Once
the sandwich is connecting with
the rollers, turn the crank to move
it through.
Tip: For easier loading, hold the
sandwich and lead with one corner
rather than the whole edge.
Slight popping or creaking as the
sandwich passes through the
machine is normal.
Final Step
Once the sandwich has
completely run through the
rollers, the cutting plate can be
removed and the result can be
accessed. Place the orange
cover under the die and press
down — the letterpress plate
and finished result will raise
and be easier to remove.
9