Fiskars Fuse Creativity System Guide De Démarrage page 12

Letterpress Only
Follow these simple steps to letterpress in one pass through the Fuse Creativity System
Choose a
Letterpress
Plate and
Ink the Plate
Place letterpress plate on
base plate. Color design
using standard fabric-
topped ink pads or markers.
Tip: If ink gets on base plate,
wipe off before the next step.
12
Make a Sandwich
Place crafting material on top of
the letterpress plate.
Add the cutting plate, rubber
side down, on top of the
crafting material.
Tip: Printed names on the
cutting and base plates will
always face up.
One Pass Through
With one hand, gently push the
sandwich toward the rollers. With
other hand, turn the crank. Once
the sandwich is connecting with
the rollers, turn the crank to move
it through.
Tip: For easier loading, hold the
sandwich and lead with one corner
rather than the whole edge.
Slight popping or creaking as the
sandwich passes through the
machine is normal.
.
®
Final Step
Once the sandwich has
completely run through
the rollers, carefully
remove the finished result.