Fiskars Fuse Creativity System Guide De Démarrage page 13

Press Only
Follow these simple steps to press in one pass through the Fuse Creativity System
Choose a
Letterpress Plate
Place letterpress plate on
base plate.
Make a Sandwich
Place crafting material on top of
the letterpress plate.
Add the cutting plate, rubber
side down, on top of the
crafting material.
Tip: Printed names on the
cutting and base plates will
always face up.
One Pass Through
With one hand, gently push the
sandwich toward the rollers. With
other hand, turn the crank. Once
the sandwich is connecting with
the rollers, turn the crank to move
it through.
Tip: For easier loading, hold the
sandwich and lead with one corner
rather than the whole edge.
Slight popping or creaking as the
sandwich passes through the
machine is normal.
.
®
Final Step
Once the sandwich has
completely run through the
rollers, carefully remove the
finished result.
13