GreenWorks ELITE ST-120-T Guide D'utilisation page 18

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPERATION
W A R N I N G
Any contact with the attachment cutting head can result in burns and/or other serious personal
injury.
W A R N I N G
Read the safety information for safe operation when using a blade attachment and refer to the
safety rules and instructions in your attachment manual. Never use a brush cutter attachment with
this electric power head. Improper operation of a blade or any attachment could result in serious
injury.
ADVANCING LINE (See Figure 9.)
While the string trimmer is operating, the cutting line gets worn down and becomes shorter.
This trimmer is equipped with bump feed line advancement, which advances additional line
once the head is bumped on the ground while rotating. The cutting blade will cut the line to
keep an accurate cutting swath.
REPLACING THE LINE (See Figure 10.)
1.
Press the tabs simultaneously on the side of the trimmer head and remove cover and spool.
Bump knob
Tab
18
Fig. 9
Cover
Coil protection
Spool
Fig. 10.1

Publicité

Table des Matières
loading

Table des Matières