Troubleshooting; Return; Disposal - Endress+Hauser Easytemp TMR31 Instructions D'opération

Troubleshooting

8 Troubleshooting
8.1

Return

The measuring device must be returned if repairs or a factory calibration are required, or if the
wrong measuring device has been ordered or delivered. According to legal regulations,
Endress+Hauser, as an ISO-certified company, is required to follow certain procedures when
handling returned products that are in contact with medium.
To ensure swift, safe and professional device returns, please read the return procedures and
conditions on the Endress+Hauser website at
CAUTION
!
Hazardous substances
‣
Do not return a measuring device if you are not absolutely certain that all traces of
hazardous substances have been removed, e.g. substances which have penetrated crevices
or diffused through plastic.
8.2

Disposal

The device contains electronic components and must, therefore, be disposed of as electronic
waste in the event of disposal. Please observe in particular the local waste disposal regulations
of your country.
30
www.endress.com/return-material
TMR31, TMR35
Endress+Hauser