Unpacking Your Brewer; Installation - Grindmaster RC400 Manuel D'instructions

Unpacking Your Brewer

1. Place carton on a table or a stable, firm surface.
2. Open the box. Do not use sharp objects to open the box; doing so could cause damage to the brewer.
3. Remove enclosed protective materials, printed information, and the brewer.
4. Record the serial number on the cover of this manual.
5. After unpacking, check to ensure that your machine has not been damaged during shipping and includes
all components.
6. Notify your service representative regarding any questions or concerns before installing.

Installation

Where to Install
Brewer should be installed on a firm, stable, level surface. Keep away from pets. Provide supervision for
unattended children and assistance for others that require help to operate the brewer.
Drain Tube Cover
Power Switch
Power Cord
Model RC400
Water and Power Inlets
Grommet
Grindmaster ®
Water Inlet
Adapter (Auto Fill ONLY)
Valve Cap
(Pour Over ONLY)
ENGLISH 5