Maintenance And Storage; Residual Risks; Assembling Instructions - Grizzly Tools CT 2000 Li Traduction De La Notice D'utilisation Originale

MAINTENANCE AND
STORAGE
• Remove the removable battery
before carrying out mainte-
nance or cleaning work.
• Use only spare parts and ac-
cessories supplied and recom-
mended by the manufacturer.
• The machine must be checked
regularly and maintained. Have
the machine repaired in a li-
censed workshop.
Comply with the device's
instructions in the "Cleaning
and Servicing" section.

Residual risks

Even if properly operating and
handling this electric tool, some
residual risks will remain. Due
to its construction and build, this
electric tool may present the fol-
lowing hazards:
a) Cuts
b) Ear damage if working without
ear protection.
c) Damage to your health caused
by swinging your hands and
arms when operating the appli-
ance for longer periods of time
or if the unit is not held or main-
tained properly.
Warning! During operation,
this electric tool gener-
ates an electromagnetic
field which, under certain
circumstances, may impair
the functionality of active or
passive medical implants.
To reduce the risk of serious
or lethal injuries, we rec-
ommend that persons with
medical implants consult
their doctor and the manu-
facturer of their medical
implant before operating the
machine.

Assembling instructions

Remove the rechargeable bat-
tery from the device before as-
sembly. Insert the rechargeable
battery only once the device is
completely assembled. There is
a risk of injury!
Mounting the protective cover:
1. Place the protective cover (12)
onto the motor head (10) and
fasten it using the two Phillips
screws (19).
2. Place the distance roller (16)
onto the protective cover (12)
and fasten it using the 4 Phillips
screws (19).
Installing the cutting unit:
3. Insert the cutting disk (14) into
the cap (13). The side of the
cutting disk (14), on which the
rotation direction is indicated
by arrows, must be visible after
insertion.
GB
61