Safety Instructions; Symbols And Icons; Symbols On The Trimmer - Grizzly Tools CT 2000 Li Traduction De La Notice D'utilisation Originale

Sound power level (L
guaranteed ..............................94 dB (A)
measured ..... 91.6 dB (A); K
Vibration (a )
h
upper handle ...... 0.87 m/s
additional
handle ................ 1.04 m/s
* The actual runtime under load of a fully
charged battery depends on how you work and
on the load put on the trimmer during opera-
tion.
Noise and vibration values have been
determined according to the standards
and regulations mentioned in the declara-
tion of conformity. The vibration and noise
measuring processes in accordance with
EN 50636-2-91, were completed success-
fully.
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration
of conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
)
WA
= 2.41 dB
WA
; K= 1.5 m/s
2
; K= 1.5 m/s
2
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched
2
on but running without any load).
2

Safety instructions

Ensure that the safety instructions
are observed when operating the
trimmer.

Symbols and icons

Symbols on the trimmer

WARNING!
Carefully read these Operat-
ing Instructions.
Wear goggles and ear de-
fenders.
switched off. Keep hands and feet
at a safe distance.
Do not expose the trimmer
to moisture. Do not work
when it is raining and do not
cut wet grass.
The cutting device
will keep rotating for
a few seconds after
the device has been
GB
55