Programming Track Numbers - Philips AZ 1145 Mode D'emploi

Different play modes: SHUFFLE and REPEAT
You can select and change the various play modes before or during
playback. The play modes can also be combined with PROGRAM.
SHUFFLE - tracks of the entire CD/ program are played in random
order
SHUFFLE and REPEAT ALL - to repeat the entire CD/ program
REPEAT ALL - to repeat the entire CD/ program
REPEAT - to play the current track continuously
1. To select your play mode, press the CD MODE button (or
SHUFFLE or REPEAT on the remote control) before or during
playback until the display shows the desired function.
2. Press PLAY•PAUSE 2; (on the remote control 2;) to start
playback if in the STOP position.
3. To return to normal playback, press the CD MODE button or
the respective SHUFFLE or REPEAT button until the various
SHUFFLE / REPEAT modes are no longer displayed.
– You can also press STOP 9 to cancel your play mode.

Programming track numbers

Program in the STOP position to select and store your CD tracks in
the desired sequence. If you like, store any track more than once.
Up to 20 tracks can be stored in the memory.
1. Use the SEARCH ∞ or § on the set (on the remote control ¡
or ™), to select your desired track number.
2. Press PROGRAM.
™ Display:
and the selected track number.
PROGRAM
appears briefly.
™ If you attempt to program without first selecting a track
number, is shown.
3. Repeat steps 1-2 to select and store all desired tracks.
™
is displayed if you attempt to program more than
20 tracks.
4. To start playback of your CD program, press
PLAY•PAUSE 2;.
Reviewing the program
In the STOP position, press and hold down PROGRAM for a while
until the display shows all your stored track numbers in sequence.
continuously in random order
CD PLAYER
CD
PROGRAM
13