Removing And Applying The Cover; Removing The Back Rest Cover; Removing The Seat Cover; Removing The Cover Of The Leg Extension - KIDDY cruiserfix3 Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 46
EN

10 Removing and applying the cover

Never use your KIDDY child restraint system without the original
!
cover. The cover is part of the safety concept.

10.1 Removing the back rest cover

The back rest cover consists of two pieces. One part covers the headrest (G) and
back rest, the other covers the shoulder supports (H).
First, separate the headrest cover from the shoulder support cover. Now open
the hook and loop fasteners on the back of the headrest (G), remove the cover
from the height adjustment handle (M) and take the cover off.
Finally, open the hook and loop fasteners on the back of the shoulder support
cover and remove the cover from the shoulder supports (H).

10.2 Removing the seat cover

First open the press studs on the underside and back side of the seat (I) and the
front of the back rest (C).
Now disengage the left and right hook and loop fasteners under the cover and
pull the cover up and off.

10.3 Removing the cover of the leg extension

First pull the leg extension (J) into the most forward position.
Then detach the cover from the hook on the underside of the leg extension (J).
Now carefully pull the cover over the edge of the leg extension (J) in an upwards
motion.
26

Publicité

Table des Matières
loading

Table des Matières