Introduction; Suitability - KIDDY cruiserfix3 Guide D'utilisation

EN
KIDDY Cruiserfix 3 instructions for use

1 Introduction

We are pleased that you chose the KIDDY Cruiserfix 3 as your child restraint sys-
tem (A).
The Cruiserfix 3 is another innovative product from KIDDY. With its special energy-
absorbing materials, your KIDDY child restraint system offers the greatest possible
safety in the event of a side crash. Your child safety car seat is also equipped with
+
KIDDY Shock-Absorbers (F) and with the k-fix fastening system for extensive
protection during frontal impact.
In order to guarantee the best possible protection of your child, the
Cruiserfix 3 must be used in the manner described in this manner.
The parts of your Cruiserfix 3 are identified by letters in the text of these directions for
use and are explained under the headings with the same name.

2 Suitability

The Cruiserfix 3 has been tested and approved in accordance with the latest ver-
sion of the Safety Standard ECE-R44/04. It has been issued the design
approval for the 'universal' and semi-universal' classes.
'universal': means that it may be used in any position in all vehicletypes with
3-point vehicle seat belt in accordance with ECE 16 or comparable standards.
'semi-universal' means that the child restraint system can also be secured to
the ISOFIX fastening point in the vehicle.
If this is the case, the child restraint system may only be installed in vehicles
which are listed in the supplied type list. The type list is continuously updated.
The latest version can be found online at
http://www.kiddy.de/vehicletypelist
18