Opening The Diagonal Belt Guide; Removal Of The K-Fix + After Semi-Universal Use - KIDDY cruiserfix3 Guide D'utilisation

Please ensure that the belt latch opposite the diagonal belt
!
guide (B) is used (Fig. 16).
The belts may not be twisted and must run closely along you child's body.
Ensure the correct position of the vehicle belt latch.
Then tighten the belt system (Fig. 16).
Check the belt run regularly during longer trips.

8 Opening the diagonal belt guide

To remove the diagonal belt from the diagonal belt guide (B), open the hook (O)
and pull the belt forwards out of the diagonal belt guide (B) (Fig. 17).

9 Removal of the k-fix + after semi-universal use

Actuate the unlocking handle (R) (Fig. 18, No. 1) while simultaneously pulling the
seat (I) away from the vehicle back rest (Fig. 18, No. 2).
Open the left and right k-fix
(P) forward (over the 'green' locking display (N)) (Fig. 19).
The Cruiserfix 3 is uncoupled from the vehicle structure when both connectors
(E) are open.
+
Finally, the k-fix connectors (E) must be retracted into the seat.
To do so, rotate the connectors (E) towards the seat (Fig. 20). For this purpose,
actuate the unlocking handle (R) (Fig. 21, No. 1) and push the connectors (E)
completely into the seat (I) (Fig. 21, No. 2). The connectors must be correctly
retracted into their respective recesses in the seat.
Now release the unlocking handle (R).
+
connectors (E) by sliding the unlocking mechanisms
25
EN