Publicité
Description
four radio modules should be operated as re-
peaters in a networked system.
Up to eight networked systems can be set up
with an address coding. Signals are only ex-
changed between Home Smoke Detectors in
the same networked system. Home Smoke
Detectors from other networked systems do
not react. The address coding is set by the
slide switch on the radio module.
Two screw terminals are located on the radio
module for connecting to a Home Smoke
Detector with a contact module*. Via the con-
tact module, the network module can be con-
nected by wires to external signal transmit-
ters (e.g. a siren), to alarm systems or to an
®
ABB i-bus
EIB.
* See ABB Product Catalogue
Publicité
