Technical Data; Travel Speed; Distance To The Id Tag; Separation Between Read/Write Heads - IFM Electronic efector190 DTA100 Notice D'utilisation

12. Technical data

DTA100
Read/write head
DTS/125/RW/AS/US
with integrated AS-i slave
profile 7.4
rotatable M12 connector
Application
Electrical design
Operating voltage
Current consumption
Operating frequency

Travel speed *

Distance to the ID tag *

Separation between read/write
heads
[mm]
Data provision time
Value range
Operating conditions
Protection
AS-i profile
I/O configuration
ID code
AS-i certificate
EMC
Housing material
Display
Connection
Remarks
ifm electronic gmbh • Teichstraße 4 • D-45127 Essen
/
READ WRITE HEAD FOR RF IDENTICFICATION SYSTEMS
1: integrated antenna , 2: tag positioning mark (middle of the antenna)
[V]
[mA]
[kHz]
[m/s]
[mm]
[ms]
[Hex]
[Hex]
*) referred to the ID tag E80301 (middle of the screw)
For the distances to other ID tags see the respective data sheet (E803xx)
We reserve the right to make technical alterations without prior notice .
Detection of objects on conveying systems;
suitable for travel speeds up to 0.5 m/s
AS-i
26.5...31.6 DC (AS-i)
50
125
read: 0.5
write: only static
read: 15 (at 0.5 m/s);
write: 10 (static)
read: 200
read and write:
70
16 bits (15-bit ID value, 1-bit message)
operating temperature: -20...50 °C
storage temperature: -25....80 °C
vibration: 20 g; 10...2000 Hz
shock: 50 g; 11 ms
IP 67, III
7.4
7
4
71501
EN 50295 (1999-03)
PA (polyamide)
3 LED
green: operating voltage
yellow: tag read
red: error AS-i data communication
M12 connector
DTA100
20 (static)
400
GB - DTA100 17.03.2006
17