Other Setting; Using An Sd Card; Preparation - JVC GZ-MS120AU Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Other Setting

Using an SD Card

If you want to record to an SD card, the
following operations need to be performed.
Operations are confirmed on the following
SD cards. Class 4 or higher compatible
SD or SDHC card Panasonic, TOSHIBA,
SanDisk, ATP SD card (256 MB to 2 GB) or
SDHC card (4 GB to 32 GB).
If other media are used, they may fail to
record data correctly, or they may lose data
that had already been recorded.
MultiMediaCards are not supported.
Cards used to record video on this
camcorder cannot be played back on other
devices.
Some card readers (including internal card
readers in PCs) may not be able to support
SDHC format. If you use an SDHC card for
recording and encounter any reading error,
the card reader you are using, might be a
non-SDHC supported device. Please use
the camcorder or other SDHC compatible
devices to access the card.
Q Insert an SD card

Preparation:

Press Power ( ) button to turn off the
camcorder.
1
Open the SD card cover.
2
Firmly insert the card with its clipped
edge first.
3
Close the SD card cover.
L
To remove an SD card
Push the SD card once.
After the card comes out a little, pull it out.
1
Clipped Edge
NOTE
Insert and remove the SD card only while
the power is turned off. Otherwise, data on
the card may be corrupted.
Do not touch the terminal on the reverse
side of the label.
R Change the recording medium
The camcorder is programmed to record on
SLOT A when it is shipped from the factory.
You can change the recording medium to
SLOT B.
Set [VIDEO SLOT SELECTION] and
[IMAGE SLOT SELECTION] to [SLOT A]
or [SLOT B].
INFORMATION
1. Recording media switches automatically
from Slot A to Slot B and vice versa
after the card in the selected slot is full.
2. You can select Slot A or Slot B manually
as recording media for video and still
image respectivety.
S Format an SD card when using it for
the first time
Select [FORMAT SD CARD] to format
the card.
MEDIA SETTING
SCENE SELECT
SCENE SELECT
1
1
FOCUS
FOCUS
@
@
SLOT A
,
,
ADJUST BRIGHTNESS
@
SLOT B
SHUTTER SPEED
SHUTTER SPEED
@
@
SET
QUIT
MEDIA SETTING
VIDEO SLOT SELECTION
IMAGE SLOT SELECTION
,
FORMAT SD CARD
ERASE ALL DATA
SET
QUIT

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Gz-ms120buGz-ms120puGz-ms120ru

Table des Matières