Storage; In The Case Of A Water Landing; In The Case Of A Heavy Landing; Manufacturing Defects, Wear, Serial Number - Kortel Design K-Flex Manuel D'utilisation

11.4

Storage

Ideally the harness should be stored at a mild temperature in a dry place away from direct exposure to light.
Avoid compressing the back protection.
Take care to not fold parts of the harness which contain stiffer materials.
11.5

In the case of a water landing

In sea water: rinse your harness with the fresh water then dry it. See washing chapter 11.3.
In fresh water: follow the washing procedure chapter 11.3.
11.6

In the case of a heavy landing

Check your reserve parachute is not damaged and verify its extraction.
Check the back protection is in good condition, there are no holes in the cover, and that it has returned to its normal shape correctly.
Check that the seat plate is not broken.
Check there is no destructive abrasion on any vital part of the harness, including the sewing.

12) Manufacturing defects, wear, serial number

In the back pocket of the harness you will find a sticker listing the main directions for use, on which you will find the serial number of your harness.
On harnesses without back pockets (mountain harnesses...), the label is attached directly to the harness.
In case of problems of wear, rupture of sewing or materials, please indicate the serial number to allow us to check the others harnesses of the same series.
Beyond the legal period of 1 year, we will only repair free of charge problems which prove to be due to a manufacturing or design defect.

13) Further information

For any questions or supplementary photos, please consult our web site or contact us at the address below.
20