Pre-Operate Inspection; Engine Oil - Rato 60-7559-6 Manuel Du Propriétaire

III. PRE-OPERATE INSPECTION

1. ENGINE OIL

Use 4-stroke engine oil, API service classification SE class or
equivalent. Check the API service label on the oil container to be sure
it includes the letters SE class or equivalent .
SAE 10W-30 is recommended
for general use. Other viscosities
shown in the chart may be used
when the average temperature in
your area is within the indicated
range.
Oil level check
Check method:
1) Remove the dipstick and clean it.
2) Reinsert the dipstick into the oil filling hole without screwing it, and
check oil level.
3) If the oil level is too low, add the recommended engine oil up to the
oil filling neck.
4) Reinstall the dipstick.
5) Lubrication oil capacity:

PRE-OPERATE INSPECTION

SAE VISCOSITY GARADES
ENVIRONMENT TEMPERATURE
212cc 0.5L
· 6 ·