Disassembling Your Electronic Pump - Philips AVENT SCF314/02 Mode D'emploi

Disassembling Your Electronic Pump

Make sure that your breast pump motor is turned off and unplugged before disassembling parts.
See section titled, 'twin electronic breast pump Parts Guide' on page 1 for a description of the First
(Control) Pump and Second Pump.
First (Control) Pump
Second Pump
5
First (Control) Pump
On the first (control) pump, remove the control
1
handle by pulling it away from the silicone diaphragm.
Second Pump
On the second pump, detach the transparent tube
2
from the double pumping connector. Remove the
double pumping connector by pulling it away from
the silicone diaphragm.
Perform steps 3-5 on both the First
(Control) Pump and Second Pump.
3
Remove the silicone diaphragm by pulling it
away from the pump body.
4
Remove the white valve from the pump body.
Remove the Let-down Massage Cushion
5
by gently pulling it away from the funnel
on the pump body.