Assembling Procedure - Optika Italy SLX Série Manuel D'instructions

7.5

Assembling procedure

7.5.1 SLX-1 / SLX-2 / SLX-3
• The microscope is shipped from the factory
with the batteries already installed. However,
in some cases it is necessary to ship the mi-
croscope with the batteries disconnected.
1. Open the lid of the battery compartment. (Fig. 1)
2. Insert the provided rechargeable batteries (re-
specting the polarity of each battery). (Fig. 2)
3. Close the lid.
4. Insert the microscope body in the holder. (Fig. 3)
5. Lock the fixing knob ①. (Fig. 4)
Page 10
Fig. 1
Fig. 2
Fig. 3
①
Fig. 4