Software Installation; Installing On Windows 98Se/Me - Atlantis Land A02-UP-W54 Manuel Utilisateur

3. Software Installation

This section describes the procedures of installing the driver and utility. Follow the
instruction step by step to finish the installation. If you use Windows® 98SE/ME,
please prepare the Windows® Setup CD at hand before installing the driver;
because the system will ask you to insert the Setup CD to copy files during the
installation.

3.1 Installing on Windows 98SE/ME

Step 1. Start Windows. Insert the driver CD into your CD-ROM drive.
opening banner, Windows will tell you that the new device has been
detected. You will then see the following screen. Click "Next >".
Step 2. In the next window, select "Search for the best driver for your device"
and click "Next >".
Step 3. Check "Specify a location". Click "Browse..." to specify the driver
directory
CDRom:\USB\Drivers\WindowsME) for installing Wireless USB Adapter
. Click "OK" and then "Next>" to continue.
Step4. When the installation is completed, click Finish button.
Go to your
"CDRom:\USB\Utility\Setup.exe" in the dialog box and click OK.
After finish the installation, plugged in the Wireless USB Adapter, you will see
Wireless Configuration Utility Country Selector, select the country where you are
using this Wireless device, users are responsible for ensuring that the channel set
configuration is in compliance with the regulatory standards of these countries.
Warning: Be noted that selecting the incorrect region may result in a
violation of applicable law; you will need to select the correct domain.
Wireless USB Adapter
such as
Windows Start
CDRom:\USB\Drivers\Windows98\
menu and
After the
choose Run,
(or
type
5