Installing On Windows 2000/Xp - Atlantis Land A02-UP-W54 Manuel Utilisateur

You will see the icon on the Windows task bar when you finish the installation.
When the icon in the toolbar represents in green color, it is properly connected to
the network and if it represents in red color, then it is not connected to the network.

3.2 Installing on Windows 2000/XP

Step 1. Start Windows. Insert the driver CD into your CD-ROM drive. After the
opening banner, Windows will tell you that the new device has been
detected. You will then see the following screen. Click "Next >".
Step 2. Select "Search for a suitable driver for my device" (In Windows XP
select "Install from a list or specific location"). Click "Next>". In next
window, check "Specify a location" and click "Next>".
Step 3. Click "Browse..."
CDRom:\USB\Drivers\Windows2000\
CDRom:\USB\Drivers\WindowsXP) for installing Wireless USB Adapter .
Click "OK" and then "Next>" to continue.
Step 4. When windows titled "Digital Signature Not Found" appear, press "Yes"
to continue the installation.
Step 5. When the installation is completed, click Finish button.
Go to your
"CDRom:\USB\Utility\Setup.exe" in the dialog box and click OK.
After finish the installation, plugged in the Wireless USB Adapter, you will see
Wireless Configuration Utility Country Selector, select the country where you are
using this Wireless device, users are responsible for ensuring that the channel set
configuration is in compliance with the regulatory standards of these countries.
Wireless USB Adapter
to specify
Windows Start
the driver
menu and choose
directory such
Run, type
as
(or
6