Hardware Installation; Powerline Network Configuration Utility - Atlantis Land Net Power 202 Kit Guide D'installation Rapide

ETH-LINK/
ACT
]
[
PORT
ETHERNET

4. Hardware Installation

1. Plug the Powerline Ethernet Turbo Adapter into an AC outlet (Do not plug
device into a power strip or surge protector).
2. Plug one end of an ETHERNET cable into the Powerline Ethernet Turbo
Adapter and plug the other end to a PC or device.
3. Install the Powerline Network Configuration Utility (Optional).

5. PowerLine Network Configuration Utility

Please following next steps to install driver/utility:
1. Insert the CD-ROM and the Auto-run program will appear. Alternatively,
open a file browser and double click on the autorun.exe file located in the
CD directory. In some specific setting on Windows system, you may need
to proceed the software manually, go to your Windows Start menu and
choose Run, type "CDRom:\A02-PL202Kit\Utility\SETUP.EXE" in the
dialog box and click OK.
2. Click on A02-PL202Kit icon to select NetPower 202Kit.
3. Select PowerLine Network Configuration Utility to start installation
program.
4. Follow the install wizard instructions to complete the installation.
 Lights up when connected to the Ethernet port of the
computer or other Ethernet devices.
 Flashes during data transfer.
Meaning
This is the connection point for connecting it to a computer or
other devices with Ethernet port.
D:\ will depends on where the CD-ROM drive is located and
<Windows OS> will depend on the Windows OS you are using.
15