OK. ODL 32642H-DB Mode D'emploi page 80

DC
12V
Plugging of the adapter to the TV
WARNING: The appliance should only be used with the given adapter.
3. Plug the external antenna or cable tv cable into the antenna / cable input socket on the back of the TV
set.
Antenna socket (75 Ohm - VHF/UHF/Cable) can be used to connect an external antenna or other devices
(Video record appliance, satallite receiver, etc) which are connected with modulator. We recommend you
to connect other devices (Video record appliance, satallite receiver, etc) to your TV set initially, because of
additional steps, the set up procedure will be complicated. You can connect this devices after you finish
the channel settings.
4. Power on the TV by pressing POWER button in front of the TV.
Note: Before you connect other devices to AV sockets, make the first channel settings not to have a
problem for appliance selection.
Note: Plug off the adapter before you connect any appliance to your TV. Otherwise it will cause your TV to
break down.
2. Plug the adapter cable FIRST to the adapter input on the
appliance, and THEN to the wall plug.
8
EN