Warranty Statement - Wolfcraft 5019000 Traduction De La Notice D'utilisation Originale

• Now mount both of the retainers (9) onto the swivel arm (2) with the spacers (10)
and the Allen screws (11). These two connections are only loosely mounted.
• Insert the two adjustment screws (5 and 7) in the swivel arm (2) recess, together with the adjustment
nuts.
• Now mount the protective cover (8). To do so, insert the cover hoop in the corresponding opening
in the swivel arm (2). Now fasten the hoop in place with the screw (13) and the nut (14).
• Now mount the angle grinder with the cutting disc between both of the retainers (9). To do so,
use the matching mounting material (16) in the sizes M10, M8 or M6 as shown.
• Align the angle grinder between both of the retainers (9) and fix the angle grinder in place with
the screws, locking nuts and the spacer (15). Mounting material of the sizes M8 and M6 require
the insertion of additional plastic sleeves into the retainers (9).
• Adjust the two adjustment screws (5 and 7) so that the angle grinder is positioned perpendicular to the
base plate (1). Now screw the two washers and the nuts onto the adjustment screws and tighten them.
Now tighten the two Allen screws (11).
• After loosening the Allen screws (3) slightly, adjust the swivel arm (2) so that the cutting disc immerses
into the cutting gap in the base plate (1), now retighten both of the screws.
• Now clamp the mains cable of the angle grinder in the cable holder (12).
• After completing the assembly, switch the angle grinder on for a few seconds and then switch
it off again. Re-check the tightness of all of the screws and the screwed connections.
• Your cutting stand is now ready for use.
Dear DIY enthusiast,
You have purchased a high-quality wolfcraft appliance which we know you will enjoy using.
wolfcraft appliances are built to high technical standards and undergo intensive development
and testing before leaving the factory. Constant checks and regular tests during their production ensure
a high standard of quality. Sound technical developments and reliable quality assurance give you the
certainty that you have made the right purchase decision. For this wolfcraft product we grant you
a 10 year guarantee from the date of purchase, provided the appliance is used exclusively
for DIY purposes.
This warranty only covers damage to the object of purchase itself and only such damage that
is attributable to material or manufacturing defects. This guarantee does not cover defects
or damage attributable to improper operation or inadequate maintenance of the appliance. Moreover,
the guarantee does not include the effects of normal wear, or defects or damage known to the customer
upon conclusion of the purchase contract. Guarantee claims can only be asserted upon submission
of the invoice/proof of purchase. The guarantee granted by wolfcraft does not restrict your legal rights
as a consumer (supplementary performance, rescission or reduction, compensation for damages
or expenses).
Warranty claims should be addressed to:
wolfcraft GmbH
Wolffstraße 1
56746 Kempenich
Germany
t

Warranty statement

12