Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5
INSTALLING A SUPPORT FOR A SECOND BATTERY
1.
Remove the three screws on the stem using a
no.2.5 Allen wrench, as shown. Then, remove the
cover that's placed below the charging port.
3.
Install the battery by sliding it into the support
bracket.
2.
Install the support bracket and fasten securely
using the three screws you previously removed.
4.
Verify that your scooter powers on and off.
19
electric
SCOOTER
Publicité
Table des Matières
