Dashboard & Power Button; Charging - IWatMotion iWatRoad R8 Manuel D'instructions

2 DASHBOARD & POWER BUTTON
Speedometer
Displays the current speed. Also displays error codes when faults are detected.
Battery level
Shows the remaining battery level with 5 bars. Each bar equates to, approximately, 20% battery level.
Mode (double click the power button to change mode):
Red " " icon: Sport mode (maximum power/speed and reduced range).
•
• White " " icon: Standard mode (moderate power/speed and range).
• No " " icon: Speed limit mode (minimum power/speed and increased range).
Bluetooth
A blinking Bluetooth icon indicated that the vehicle is ready to connect. A solid Bluetooth icon indicates that
the vehicle is connected to a mobile device (depending on the electric scooter model).
Power button
Short press to power on. Long press to power off. When it's turned on, a single click will turn on/off the
headlight. A double click will change modes.
3

CHARGING

1.
Open the charging port
cover.
2.
Insert the charger.
WARNING
Do not connect the charger if the charging
port or the cable are wet.
Your scooter will be fully charge when
the LED on the charger changes from red
(charging) to green (fully charged).
Cover the charging port when not in use.
17
electric
SCOOTER
3.
Once you have charged
the scooter close the
charging port.