Assembly Instructions - IWatMotion iWatRoad R8 Manuel D'instructions

EN
4

ASSEMBLY INSTRUCTIONS

1.
Unfold the stem and push it until you hear a
click. Then unfold the kickstand to support the
scooter.
3.
Screw four of the screws provided (two on
each side) with the provided Allen wrench.
Headlight towards
the front.
2.
Securely connect the wires inside the
handlebar and the stem. Slide the handlebar
onto the stem. Make sure it's the right way
round.
4.
Ensure your scooter powers on and off.
18