Device Overview; Before Initial Use; Mounting / Removing Attachments - DS Produkte YF-418-12 Mode D'emploi

EN

Device Overview

8
7
6
• The brush attachment (6) is suitable for freshening up home textiles such as uphol-
stery, curtains etc.
• With the crease attachment (7) you can iron creases (e. g. into trousers and skirts). Also
it is suitable for smoothing clothing (e.g. made from linen, cotton, polyester and silk).

Before Initial Use

Remove any fi lms or stickers that may be present from the device and accessories.
Never remove the rating plate and any possible warnings!
Note: Water residues in the reservoir can be attributed to quality checks per-
formed prior to delivery.

Mounting / Removing Attachments

NOTE!
■ Shortly after use, the attachment used may still be very hot. Wait until the device and
the attachment used have cooled down completely before removing them.
16
• Attaching: Place the attachment with the locking lug at
the top on the steam bottom and press it down fi rmly. The
attachment must be heard to engage in place.
• Removing: Pull the tab on the bottom of the attachment
forwards and remove the attachment.
1 Control lamp lights up as
device heats up
2 Steam release button
3 Handle
1
4 Water reservoir cap
5 Water reservoir
6 Brush attachment
2
7 Crease attachment
3
8 Steam bottom
4
5