Items Supplied - DS Produkte YF-418-12 Mode D'emploi

NOTICE – Risk of Damage to Material and Property
■ The device should only be connected to a properly installed socket with safety con-
tacts. The socket must also be readily accessible after connection so that the con-
nection to the mains can quickly be isolated. The mains voltage must match the
technical data of the device.
■ Do not use the device with an extension cable.
■ Do not iron over zips, studs, clips etc. to prevent any scratching of the steam bottom.
■ Never use in front of surfaces made from glass or plastic.
■ Never cover up the steam nozzles and do not insert any objects into them.
■ Only activate the steam release button when the water reservoir is fi lled with water
as otherwise the water pump may be damaged and the useful service life of the
device may be shortened.
■ Protect the device from heat, naked fl ames, extreme temperatures, persistent mois-
ture, wet conditions and collisions.
■ Always test the device fi rst on a small, inconspicuous spot on the clothing.
■ Make sure that the mains cable is not squashed, bent or laid over sharp edges and
does not come into contact with hot surfaces.
■ Switch off the device and pull the mains plug out of the plug socket if an error occurs
during operation or before a thunderstorm.
■ Never wind the mains cable around the device.
■ Never pull or carry the device by the mains cable. When you pull it out of the plug
socket, always pull on the mains plug and never the mains cable!
■ Use only original spare parts from the manufacturer.

Items Supplied

• Steam brush
• Brush attachment
• Crease attachment
• Storage bag
• Measuring cup
• Instruction manual
Check the items supplied for completeness and any transport damage. If you fi nd any
damage to the components, do not (!) use them, but contact our customer service de-
partment.
15 EN