Saey 200 HOUT Mode D'emploi page 23

Make an appointment with a recognised chimneysweeper so that the
specific regulations applicable in the country of use in this regard, are
also complied with.
Also pay attention to the following:
The stove is suitable for a chimney with several shafts. For this
purpose, the stove must be used with closed doors.
The inflow of air must be sufficient in whatever space the appliance has
been installed. Tightly closed doors and windows may cause problems
in this regard.
Preferably place your stove near the chimney (hearth). A heat-resistant,
fireproof base (bottom plate) must be placed underneath the stove.
These bases (made of cast iron, steel sheeting,...) are available
commercially.
In any case, ensure that the base is fireproof.
Flammable objects such as doors, furniture, woodwork etc. must be at a
distance of at least 60 cm.
Thanks to the protective plate at the back of the stove, the appliance
may be placed up to 30 cm from the wall.
3. CONNECTING THE STOVE TO THE CHIMNEY
A strong chimney draught makes it possible to connect the stove
directly to the chimney. The chimney draught must be above 0,08 mbar
(0,8 mm WK). The diameter of the smoke duct must correspond with
that of the connector (150 mm).
The smoke duct must be sealed at all connection points! Attention
is specifically drawn to the danger of escaping fumes.
False air results in a weaker chimney draught.
23