Message When All The Reservoirs Are Empty - Oki IP-7900-26 Guide De Référence Rapide

2
Remove the outer cap from the ink bottle.
Note
- Do not remove or make a cut in the inner silver seal. The
ink may spill out if the seal is removed or damaged.
Paper cap
Silver seal
Note
- When you remove the outer cap from a bottle, it might happen
that the paper cap remains on the top of the silver seal. In such a
case, remove the paper cap taking care not to take the silver seal
off.
3
Screw the ink bottle onto the reservoir.
The silver seal breaks and the ink flows into the
reservoir.
Note
- It takes several minutes for the ink to completely flow into
the reservoir. When charging several bottles, make sure no
ink remains inside the bottle before removing it from the
reservoir.
Paper cap
Silver seal
(2)
(1)
4
Note
- Leave the bottles on the reservoirs when using the Printer.
If no bottles are mounted, foreign particles may enter the
reservoirs and cause printer malfunction.
Follow the procedure below to set the ink
usage amount counter.
1
The following message appears when the
reservoirs are empty.
S U P P L Y I N K I N R E S E R V
Y 1 C 3 K 5 M 7 Y 8
* Example when the Y1, C3, K5, M7, and Y8 reservoirs
are empty.

Message when all the reservoirs are empty

S U P P L Y I N K I N R E S E R V
Y 1 M 2 C 3 K 4 K 5 C M Y
Press the key to set the Printer to
O N L I N E
offline state.
Note
- Reset only the colors displayed on the second line of the
control panel.
2
á I N K M E D I A R E G â
ß M E D I A M . A D V à
Press the key to enter the INK menu.
15